1. Thorp T-18 complete.  $30,000.00

2. Thorp T-18 project, most all materials to build, new Cleveland wheels, landing gear, two engines, complete plans, most hard to find aluminum stock.   $7000,00

3. Aircraft Audio Control Panel - Radio Systems Technology-RST
        1. Complete unit.
        2. Almost completed kit.  Cost over $200.00
            All parts included.    Both $75.00

4.  Continental C-85 starter- less gear.   $100.00

5.  Sport Aviation Magazines  mid 50's to 2007 ------ Best offer.

6.  Scintilla Magnetos (2ea) with gear, SF4R-8---------Best offer.

7.  Eiseman Magneto (1) AM-4, no gear--------Best offer

8.  Turn Buckle (Fork only) not whole turn buckle)
        AN 161-22L right hand thread 1/4-28
        Spruce price $11.25 --- will sell for $6.00 plus postage

9.  Threaded Clevis Fork Rod End
        AN 486-4P,  MS27975  1/4-28 thread
        Spruce price $16.90 --  will sell for $8.50 plus postage

10.  Aeronca Tail Spring Clamp Bracket
           #1-555 Univair price about $55.00
            will sell for $37.00 post paid
         Fits tail springs, Aeronca Champs & Chiefs

Contact Al Lurie    Telephone 309-682-1674  Afternoon and evenings.

                          
                                           1. (1) Operators manual                   
                                           2. (1) Carrying case                         
                                           3. (2) External antennas w/ 8' cable               
                                           4. (1) Yoke mount                                 

     For Sale:

     1950 Cessna 170A
    Cont. 145 engine, TT 4968, 970 S.M.O.H.

     Cleveland Wheels, MP3 Northstar GPS Apr.

     Always hangared, Peoria (PIA) Based

     Polished, Annual 10/02/2010

     $42,200.00        Call 309-648-4502

                   Larry Roberts

FOR SALE

Zenair  CH300, Tr-Z  Project, Serial #A-375

Aircraft is approximately  90% complete, wings attached and on the landing gear.  A 1959 Lycoming, O-320, 150 HP engine is also mounted on a standard straight mount.  Engine was removed from a Piper Tripacer having extensive windstorm damage.  It has about 800 hrs. remaining on a major overhaul..  A 74 inch, 61 degree prop is included and has been completely reconditioned by Anderson Propeller Co.

Following items, parts and/or instruments are installed or included in the package:

2- Bendix magnetos, S4LN-21 and associated ignition harness (New, not installed)

Alternator, new,  installed

Air-Science RT-787 Transponder and antenna (installed)

Air-Science RT-563A 720 Channel Navcom with antennas (installed)

Apollo II Morrow 612B Loran (New, installed but obsolete)

ACK Altitude Encoder  (Installed)

All instruments, ie. Airspeed, Dir. Gyro, Altimeter, Vertical Speed Indicator, Manifold Pressure, Oil Pressure, Oil Temp. Fuel, Vacuum, Voltmeter, Ammeter, etc, are all new except Turn & Bank Coordinator which is used, reconditioned.  BN-3 Spinner Kit is included but not installed.  Plexiglas Canope and Sliding frame included but not fitted nor installed.  Flap Actuator Motor (Automobile Window Control) is installed but not wired nor connected to flaps.  Misc. parts, seats, etc.

Complete set of plans, Instruction Book, Newsletters and updates from designer, Chris Heintz, are included.

I have invested over $17K but asking $12K firm.  Project is hangered at Greater Peoria Airport, Hanna City T’s and may be viewed by appointment.  Serious inquiries only.

Call Vic DeCroix at 309-383-4293